S.NO	PARAMETERS	TEST METHOD	UNIT	SN-25
1	Appearance	Visual	-	Clear and Bright
2	colour	ASTM-D 1500	-	3.0-5.5
3	Density at 15deg C	ASTM-D 1298	Gm/mL	0.81-0.86
4	Kinematic Viscosity at 40 degC	ASTM-D 445	cSt	4.0-12
5	Kinematic Viscosity at 100 deg C	ASTM-D 445		2.5-3.5
6	Viscosity Index,Min	ASTM-D 2270	-	99
7	Flash point,Min	ASTM-D 92	Deg.C	>95
8	Total acid number,mg KOH/g	ASTM-D 664	mgKOH/gm	<0.05
9	Crackle test/Moisture	Standard Method	-	Negative
10	Pour Point,max	ASTM-D 97	Deg.C	-6
11	Copper Strip Corrosion max	ASTM-D 130	-	1
12	Conradson Carbon Residue	ASTM-D 189	%w/w	<0.4
13	Ash Content	ASTM-D 482	%w/w	0.04
14	Sulphur Content	ASTM-D	%w/w	<1.5

S.NO	PARAMETERS	TEST METHOD	UNIT	SN-300
1	Appearance	Visual	-	Clear and Bright
2	colour	ASTM-D 1500	-	3.5-4.0
3	Density at 15deg C	ASTM-D 1298	Gm/mL	0.87-0.89
4	Kinematic Viscosity at 40 degC	ASTM-D 445	cSt	38-42
5	Kinematic Viscosity at 100 deg C	ASTM-D 445	cSt	6.0-7.0
6	Viscosity Index,Min	ASTM-D 2270	-	99
7	Flash point,Min	ASTM-D 92	Deg.C	199
8	Total acid number,mg KOH/g	ASTM-D 664	mgKOH/gm	<0.05
9	Crackle test/Moisture	Standard Method	-	Negative
10	Pour Point,max	ASTM-D 97	Deg.C	-6
11	Copper Strip Corrosion max	ASTM-D 130	-	1A
12	Conradson Carbon Residue	ASTM-D 189	%w/w	<0.05
13	Ash Content	ASTM-D 482	%w/w	0.01

S.NO	PARAMETERS	TEST METHOD	UNIT	FUEL OIl
1	Density at 15 deg C	ASTM-D 1298	Gm/mL	0.9-0.92
2	Kinematic viscosity at 50 deg C	ASTM-D 445	cSt	<180
3	Sulphur content	ASTM-D 4294	%w/w	1.0-2.0
4	Sediument by Extraction	ASTM-D 473	%w/w	<3.5
5	Water by distillation	ASTM-D 95	%vol	<1.0
6	Flash point PM closed cup	ASTM-D 93	Deg.C	>60
7	Ash content	ASTM-D482	%w/w	2.0-4.0
8	Carbon Residue	ASTM –D 189	%w/w	5.0-7.0
9	Gross Calorific value	ASTM-D 4868	Kcal/Kg	<10000
10	Net Calorific Value	ASTM-D 4868	Kcal/Kg	>9000
11	Vanadium content x	IP501	Ppm	<5
12	Aluminium +Silicon content	IP501	Ppm	<1500
13	Zinc content	IP501	Ppm	<2700
14	Phosphourus content	IP501	Ppm	<1700
15	Calcium content	IP501	Ppm	<7000

Base Oil

Base oil